Hawk 137

Pace Setter 766-70-2239 vs Pace Setter 766-70-2235
Which is better what's the difference

Hawk 137

http://www.jegs.com/webapp/wcs/store...=&pgGrp=search

Hawk 137

http://www.jegs.com/webapp/wcs/store...=&pgGrp=search

hokeplaya05

iTrader: (3)

first one linked gets rid of your emmision equipment (air/egr) second one keeps them. if you end up going with pacesetters, i would suggest getting a different set of header gaskets. i just had to replace the ones that come with the headers after 700 mi of use because they cracked and started leaking, same thing happened with my truck

Shownomercy

iTrader: (1)

Do you need to pass a legit inspection or is a non issue?

if non issue, get the !AIR/EGR ones and tune em out.

Otherwise, gamble.

Hawk 137

I have no emissions here and have no inspections. Are they the same headers just one has air and is it worth it to go with out air

Shownomercy

iTrader: (1)

Go without and get ceramic coating at the least.

Hawk 137

So look for some with ceramic coating

hokeplaya05

iTrader: (3)

yes, go with ceramic coating. you will have to have that stuff tuned out and will also have to get the y-pipe as well to go with those headers.

Hawk 137

What headers and y pipe did you use

hokeplaya05

iTrader: (3)

i have the ceramic coated pacesetters with the offroad y-pipe, no emissions. i got everything from summit racing. they are a good budget longtube that fits pretty good, but if i were to do it again and had the extra cash i would go with stainless longtubes like LPP or similar

Hawk 137

How hp and tourqe gain did you receive also what kind of gaskets did you get

hokeplaya05

iTrader: (3)

couldnt tell ya hp/tq gain as i put them on with my new motor, but with a nice free flowing cat-back exhaust, CAI, and tune, you could see a 10-20hp jump. i went with percy's multi layer gaskets, have had them on my truck for a little over a year without issues so i threw them on my car last week and no leaks so far.

Hawk 137

http://m.summitracing.com/parts/php-66041
Will these gaskets do

hokeplaya05

iTrader: (3)

get ones specific for the lt1, i got p/n: php-66031

Hawk 137

K thank you and how about these headers http://m.summitracing.com/parts/psm-72c2239

Hawk 137

This y pipe
http://m.summitracing.com/parts/psm-82-1161
These headers
http://m.summitracing.com/parts/psm-72c2239
And these gaskets
http://m.summitracing.com/parts/php-66031

Is there anything else I am missing to do my headers other then a tune

Shownomercy

iTrader: (1)

Bolts for headers, spark plugs, plug wires, and 02 extensions

Hawk 137

What if I just recently replaced plugs and wires

93M6Formula

Then that's fine, just be sure to have good clearance between the primaries and wires so they don't burn.