LT1 Members w/ Prostars. I need input.
#1
LT1 Members w/ Prostars. I need input.
Ive got some 15x8s and 15x3.5s on the way and i have yet to get studs and lug nuts.
So far i know i have to get shank style lug nuts and possibly longer studs.
What i need to know is what you guys went with and the part numbers too.
Im wondering if i could just get some Lugnuts and be fine without getting longer studs.
I did search but have come up with nothing. Thanks for the help guys.
Tony.
So far i know i have to get shank style lug nuts and possibly longer studs.
What i need to know is what you guys went with and the part numbers too.
Im wondering if i could just get some Lugnuts and be fine without getting longer studs.
I did search but have come up with nothing. Thanks for the help guys.
Tony.
#4
To Teh Top
So i jumped on summit and found some lugnuts
Lug Nut Seat Style: Shank
Thread Size: 1/2-20 RH in.
Lug Nut Head Style: Standard
Open End Design: Yes
Lug Nut Finish: Chrome
Quantity: Sold as a set of 5.
Lug Nut Shank Length (in): 1.380 in.
Lug Nut Shank Diameter (in): 0.680 in.
Washer Included: Yes
Washer Shape: Centered round
Washer Outside Diameter (in): 1.062 in.
Lug Nut Material: Steel
Wrench Size Required (in): 13/16 in.
So i jumped on summit and found some lugnuts
Lug Nut Seat Style: Shank
Thread Size: 1/2-20 RH in.
Lug Nut Head Style: Standard
Open End Design: Yes
Lug Nut Finish: Chrome
Quantity: Sold as a set of 5.
Lug Nut Shank Length (in): 1.380 in.
Lug Nut Shank Diameter (in): 0.680 in.
Washer Included: Yes
Washer Shape: Centered round
Washer Outside Diameter (in): 1.062 in.
Lug Nut Material: Steel
Wrench Size Required (in): 13/16 in.
Last edited by Speed Density; 03-08-2006 at 02:57 PM.
#5
12 Second Club
iTrader: (3)
first thing's first, read thru this....
http://www.freewebs.com/casper9t9/dragwheelinfo.htm
very good info
check the thread size again.....the lugnuts you need may be different since it is a 93, but on my 95 it required 12mm x 1.5.
do your grinding and test fitting first....you may not have to run longer studs. It is not a requirement, only a safety concern. I am running draglites with stock studs, and have not had a problem. If you can get the shank style lugs to make 5 or 6 complete rotations on the 4 way/lug wrench, you'll be ok.
i would recommend spending the money on some good lugnuts...i bought summit brand and they are already flaking off......don't be cheap, and get either McGard, or Gorilla Lugnuts!
http://www.freewebs.com/casper9t9/dragwheelinfo.htm
very good info
check the thread size again.....the lugnuts you need may be different since it is a 93, but on my 95 it required 12mm x 1.5.
do your grinding and test fitting first....you may not have to run longer studs. It is not a requirement, only a safety concern. I am running draglites with stock studs, and have not had a problem. If you can get the shank style lugs to make 5 or 6 complete rotations on the 4 way/lug wrench, you'll be ok.
i would recommend spending the money on some good lugnuts...i bought summit brand and they are already flaking off......don't be cheap, and get either McGard, or Gorilla Lugnuts!