Need Help On LT1
05-01-2006, 07:45 PM
#1
Teching In
Thread Starter
Join Date: Apr 2006
Location: CT
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
Need Help On LT1 Hey guys... I'm stumped here... I just finished building my LT1 and its turning over but won't fire... I replaced the battery and also put in a high torque starter... It seems like it's not turning over fast enough to fire... I have been told that possibly it's the timing... But I have no idea how to work that opti spark crap... How do you time an opti spark? Any ideas or suggestions would help alot... Thanks - Grant
05-01-2006, 07:56 PM
#3
Teching In
Thread Starter
Join Date: Apr 2006
Location: CT
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
well the entire motor is rebuilt, it has a new crank, roller rockers, longtubes, i took out the msd itwoulnt fit with my new intake, but all the stock ignition crap is in right... Honestly my friend is doing all the work, But we're both mustang guys... Well I used to be, so all this LT1 stuff is really foreign for us... I believe the opti is in correct... My friend who i bought it from said he lined the two lines up, but then my boss said that you had to move the opti over a bit... But as i said, I dont know my way around this motor at all... So I'm stumped...
05-01-2006, 08:32 PM
#6
if it is the 94 opti it will only goe in 1 way unless you force it it it just fell in place all the way againnst the t cover it is correct how did you adjust the rockers that could cause it
05-01-2006, 08:44 PM
#7
Teching In
Thread Starter
Join Date: Apr 2006
Location: CT
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
I havn't touched the rockers... My friend whom I bought the car built the motor... He said that possibly they could be too tight... We're gonna try ****** with the opti spark tomorrow night... Hopefully that's it... Wish me luck... lol