LT1-LT4 Modifications 1993-97 Gen II Small Block V8

not so good vibrations!

Thread Tools
 
Search this Thread
 
Old 06-12-2006, 08:02 PM
  #1  
Teching In
Thread Starter
 
Cybin's Avatar
 
Join Date: Dec 2005
Posts: 21
Likes: 0
Received 0 Likes on 0 Posts
Question not so good vibrations!

Okay, so here's the thing guys... my 94 formula seems smooth and no problems up to like 80-85mph... but from there on up i get some terrible feeling vibrations in the shift lever... I can't really feel it as far as ride, or body is concerned... but good goddam somethin aint right! once I let it back down below about 85 everything is smooth again. Tell me my tranny isn't goin... please oh please!

stats: lightly modded 94 formula m6... 26K miles.

Thanks,
Old 06-12-2006, 08:25 PM
  #2  
10 Second Club
iTrader: (8)
 
TwoFast4Lv's Avatar
 
Join Date: Nov 2001
Location: LT1 land...the "409" of the 90s!
Posts: 10,023
Received 6 Likes on 5 Posts

Default

Which Drive shaft? If it is steel you might be looking for a Aluminum one

Mine did that all the time after a trip to the end of the Speed-O Dealer replaced it with a 1LE unit and all was well
Old 06-12-2006, 08:31 PM
  #3  
11 Second Club
iTrader: (13)
 
James Montigny's Avatar
 
Join Date: May 2006
Posts: 2,843
Likes: 0
Received 0 Likes on 0 Posts

Default

Stock (steel) driveshaft will do that.
A broken tranny mount could do it too.

Either is easy (and cheap) to replace/upgrade with a ratchet and some jackstands.
Old 06-12-2006, 09:11 PM
  #4  
Teching In
Thread Starter
 
Cybin's Avatar
 
Join Date: Dec 2005
Posts: 21
Likes: 0
Received 0 Likes on 0 Posts
Default

If it was tranny mounts woudn't I see a pronounced problem in all situations with the shifter?



Quick Reply: not so good vibrations!



All times are GMT -5. The time now is 09:00 PM.