carzman5678

I need to figure out where I am going to mount my Mallory 685 in my 1994 Z28. I was gonna do like my buddy and mount it in the glove box for easy access. I dont want to really mount it under the hood though.

Yall help me and post some pictures of how you mounted yours.

carzman5678

...as usual no posts

imnotplutonium

iTrader: (4)

if it is anything like the msd 6a box I mounted it on the strut tower. relocated my fuel line holder a few inches and the box sits perfectly there. used a few washers and 3 bolts.

lt1camaroman93

iTrader: (7)

I'll see if I can pull up a pic, but I mounted my Digital 6plus box in my counsel.

2fast97Z

iTrader: (20)

shitty picture and dirty as hell from oil being everywhere but shows where the box is

N20Dave

iTrader: (7)

This was the old setup. We didn't carry many passengers so leg room wasn't too much of an issue.

streetwarrior96

well since mine is a ram air. I have it where the airbox on a non ram air would go.

imnotplutonium

iTrader: (4)

looks like mine great place in my opinion. if i had the 6al it would be good for changing the pills

great421

iTrader: (1)

Put the battery in the trunk then place it in the stock battery location - It worked great for me.

carzman5678

Well, I eneded up bolting it into the glovebox. Rev limiter adjustments on the fly!

383ysi

Put my battery in the back pass. quarter hole, and mounting the msd on top of the battery box. No problems either with it back there.

Dragframe

iTrader: (14)

i put mine under my pass seat... i just move the seat forward and make adjustments...

01Z28M6

I know the thread is a bit cold but here:

Here's the whole thing in progress:

camar0corey

iTrader: (22)

I've got my 6a wedged behind my K&N intake, I didn't even bolt it down cause it has nowhere to go. Thinking of putting it in the glove box, not sure if the window switch and 3 stage retard will all fit in there though. I miss my gutted 83 z28, had space for everything.

94z28L

iTrader: (4)

whats that big hammer for?

Dragframe

iTrader: (14)

mine is under the pass seat. works well. and i can change **** from my seat.

2fast97Z

iTrader: (20)

i dont really remmeber what that was used for but its always useful including hitting people when they dont stfu

Dragframe

iTrader: (14)

didn't you kinda have to massage the metal under you inition box own so it would fit?? I remember a few people doing this. Maybe you used the hammer for that? Looks like a rubber mallet htough..

carzman5678

From the dead, completely forgot I posted this But it has been done for awhile and no problems so far. Sorry about crappy quality.

SmokedOutZ28

iTrader: (35)

I put mine here, Stays cool, doesnt get wet and is out of the way.