i have some money and i want..
#2
TECH Fanatic
iTrader: (8)
Join Date: Oct 2005
Location: Holland Twp/Milford, New Jersey
Posts: 1,420
Likes: 0
Received 0 Likes
on
0 Posts
A LT and ORY system will run you anywhere from $1,000 to $1,500. I'm not sure about exact HP/TQ gains, but I know there will be a noticable difference when you first step on it. As for what kind of LT's to get, do a search.
#3
hashtagBMW
iTrader: (38)
WTF?!?!?!? $1000-1500?!?!?! No way.
There is no need to spend 1k on 1 3/4 LTs and an ORY unless its kooks stainless steel. If you want the same power gains for cheaper look into any brand LT that is 1 3/4. I would not get stepped headers on a stock car, you will make it breathe way to much and bad stuff will occur. I got pacesetter LTs and ORY of r $525 Shipped from BYUNSPEED.com and after you get them put em on yourself and save a **** load of money.
After LTs i gained .4, went 13.8 to 13.4!!
Enjoi!
Tony.
There is no need to spend 1k on 1 3/4 LTs and an ORY unless its kooks stainless steel. If you want the same power gains for cheaper look into any brand LT that is 1 3/4. I would not get stepped headers on a stock car, you will make it breathe way to much and bad stuff will occur. I got pacesetter LTs and ORY of r $525 Shipped from BYUNSPEED.com and after you get them put em on yourself and save a **** load of money.
After LTs i gained .4, went 13.8 to 13.4!!
Enjoi!
Tony.
#6
11 Second Club
iTrader: (88)
I am getting LT's and exhaust soon, I am getting Pacesetters from Summit. Everyone is going to have their opinions. I have a little more stuff done to mine, and a tune to make them work real good. You can get more stuff with $1000-$1500 to spend. Get you some lower Gears, 3.73's or 4.10's, they will grab real good with them tires.
#7
TECH Fanatic
iTrader: (8)
Join Date: Jul 2005
Location: Memphis, TN
Posts: 1,105
Likes: 0
Received 0 Likes
on
0 Posts
I got my pacesetter ceramic coated long tubes new of the for sale section on the board for $400
Summit 2.5" x-pipe kit $150
I run single chamber flowmaster race mufflers I think $150 for 2
So long tubes, x pipe and dual flowmaster or bullet race mufflers for $700 PLUS welding. I got a buddy to do it for free. That will get you a killer FULL exhaust cheaper than a borla catback!
Here is in detail everything you will need. http://web.camaross.com/forums/showp...9&postcount=11
Summit 2.5" x-pipe kit $150
I run single chamber flowmaster race mufflers I think $150 for 2
So long tubes, x pipe and dual flowmaster or bullet race mufflers for $700 PLUS welding. I got a buddy to do it for free. That will get you a killer FULL exhaust cheaper than a borla catback!
Here is in detail everything you will need. http://web.camaross.com/forums/showp...9&postcount=11
Last edited by luckyou03; 06-16-2006 at 01:43 PM.