code 1361
#1
Teching In
Thread Starter
Join Date: Jun 2006
Location: ATX
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
code 1361
Ive posted this around. Ill take all the opinions I can get...
Anyway, my car is throwing code 1361, but it was running fine. I replaced the ICM and then the car did not want to idle at all. It would hang around 500rpms and then just die. I put the old icm in and the same thing was happening.
I then bought a coil but that didn't solve the problem. I put in my other PCM and that didn't help either. Am I looking at a bad opti here?
Anyway, my car is throwing code 1361, but it was running fine. I replaced the ICM and then the car did not want to idle at all. It would hang around 500rpms and then just die. I put the old icm in and the same thing was happening.
I then bought a coil but that didn't solve the problem. I put in my other PCM and that didn't help either. Am I looking at a bad opti here?
#2
Teching In
Thread Starter
Join Date: Jun 2006
Location: ATX
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
**update**
I searched a few posts and somebody at one point suggested unplugging the maf and trying to start it. Well I unplugged it and the car RAN GREAT. So I have a bad maf?
I searched a few posts and somebody at one point suggested unplugging the maf and trying to start it. Well I unplugged it and the car RAN GREAT. So I have a bad maf?
#5
Teching In
Thread Starter
Join Date: Jun 2006
Location: ATX
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
I went for a drive with the maf disconnected, and the car drove awsome. It ran perfect all the way to 6K rpm. I don't know what the deal is. Anybody have an idea?
#6
Teching In
Thread Starter
Join Date: Jun 2006
Location: ATX
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
Oh my goodness wtf is going on
Ok so i decide to put in my old PCM again and see what happens. Again, it won't run without the maf unplugged, so i leave it unplugged and take it for a ride. It runs perfect again. I get home, scan the codes, and the ONLY CODE it gave me was 0100. THATS IT. No egr code, no low ic voltage, nothing. just 0100 for the maf unplugged.
I am so ******* lost. So is it the PCM tune I got thats screwing with my car?
Ok so i decide to put in my old PCM again and see what happens. Again, it won't run without the maf unplugged, so i leave it unplugged and take it for a ride. It runs perfect again. I get home, scan the codes, and the ONLY CODE it gave me was 0100. THATS IT. No egr code, no low ic voltage, nothing. just 0100 for the maf unplugged.
I am so ******* lost. So is it the PCM tune I got thats screwing with my car?