L T Wizzun

does anyone know a cheap place to get my motor rebuilt to all OEM (stock) parts cause mine has 140,000 miles on it and i just blew a cylender? i have a 1996 lt1 trans am. i plan on slapin on a lt4 conversion kit when it gets done. And i was wondering if anyone knows ware i can get a air-conditionar condenser? mine is out and it is hot as hell

the_merv

iTrader: (88)

Did you blow the Head Gasket, or something worse..

9formula4

iTrader: (5)

Just buy the parts and rebuild it yourself. You can purchase a master rebuild kit through summit and do the whole motor yourself. But if you are going to go that way new heads and upper end is a good idea that way there are ZERO miles on the motor when finished.

aggiez28

iTrader: (19)

put in somthign better than stock stuff, put in some forged rods and pistons at least,
since your doing all the work of a rebuild you may as well spend a few hundred bucks more for better parts.

brook

L T Wizzun

i blew a spark plug at first and then a crack sum how appeared in my piston

streetrod93

iTrader: (8)

if you're interested, i have a complete turnkey 355 i'm selling....just rebuilt about 15k miles ago, cc305 cam and slightly worked heads....made 336 to the wheels is a hot day/moderate tune. i'd take 2k and work shipping with you.
i'm parting most of the car so i can build it into a race car

the_merv

iTrader: (88)

You got to be running hot to crack a Piston..
I have to play with a blown Head Gasket when I get back.

Black99TransAm

iTrader: (16)

im interested... how much???

slowmofo

iTrader: (6)

Where are you located?

Black99TransAm

iTrader: (16)

im in colorado and i will be looking into a rebuild some day soon

L T Wizzun

in spring about 5 miles down the road from 2920 and kuykendhal.

slowmofo

iTrader: (6)

What state is that in, or country for that matter

aggiez28

iTrader: (19)

its in the state of HOUSTON

slowmofo

iTrader: (6)

Ahhh well hell, there 1275643712438749764 people in Texas who can build a SBC, so im sure you can find someone to build your LT1

streetrod93

iTrader: (8)

i'm asking 2000 for the motor....and shipping would be through a freight company....i'd say 2200 shipped and i'll cover what the rest of the shipping will be

i'm in kentucky by the way, and could probablly have the motor on it's way by the end of next week