buffman

iTrader: (9)

Hola guys.

Any one have a Bin file (or LT1 edit file I have both but use Tunercat) for a 94-95 LT1 Corvette or for a 94-95 T/A with Ram Air?? Im in need of the MAF tables for some calibration of my tune...

Thanks

Matt

TwoFast4Lv

iTrader: (8)

they do not mean much and if you upload the vette file in an F-body the car won't run

I have both on the tuning laptop but it is not here

buffman

iTrader: (9)

Ellis im just specifically looking for the stock MAF Tables.. I could care less about the tune just need the stock MAF calibration Tables for either a vette or a T/A with ram air. As I recall the calibrations tables are different because of the location of the MAF in those two cars compared the camaro

TwoFast4Lv

iTrader: (8)

Yup but if you are going to tune it right they will be different when you get done

I just tried to send you a ram air file but you do not have a E-mail listed

buffman

iTrader: (9)

understandable. Not sure if you've seen my intake setup, but it's basically the same as vette style. The whole thing consists of Vette boot, MAF, Filter Not sure if I told you about my problem with that injector connector, but now that it's fixed, im running rich. I dont think bumping up the inj constant is going to help anymore. I wanted to start with the appropriate MAF calibration tables and work my way from there Let me fix the email thing

Fixed Email