You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join LS1Tech.com today!
do you just need a water pump drive seal
and a water pump bearing seal? the back part with the thing that slides over the gear you can move it slighlty and i heard its time for a new one, but can i just buy the bushings and rebuidl mine? and if so how do you pull the bushing and install new ones, how do you rebuild it?
That said Advance Auto has remanufactured ones for $41 so don't spend too much on the parts. The impeller I would reuse if it looks good.
i posted some part numbers above, i asked around there is no rebuild kit, but what is this bearing seal? i looked around and got a remanufactured water pump for 70 + core exchange, so obesely they are can be rebuilt but how?
that guy has rebuilt a water pump for a friend of mine and is going to rebuild mine, my friend coated his housing in ceramic and im doing the same and the only way to is to take everything apart and getting them rebuilt. I dont know what all is involved but we take our pump apart, coat the housing and send everything to him and about $60 later they are rebuilt. Only way to powdercoat your water pump.