SSClone

iTrader: (24)

Will the CC306 cam work with Trick Flow heads with 62cc chambers on a stock bottom end? Trying to find a good street cam with decent lift.

Derrick

95greenZ

iTrader: (2)

you'll want to have the trickflows milled so you won't lose compression.

seawolf06

iTrader: (8)

What pistons are you using?

Compression is definitely something you want to consider.

SSClone

iTrader: (24)

Stock bottom end.

seawolf06

iTrader: (8)

Yeah, you're going to lose a lot of compression with those heads as they are now. Check out the Lunati Voodoo grinds and XFI grinds as well.

streetwarrior96

Just get the LT1 gaskets from impala. they are .026 rather than the stock .038. Shoult give you 1/2 point on compression

seawolf06

iTrader: (8)

9.38 SCR with stock gaskets
9.67 SCR with Felpro gaskets
9.98 SCR with Impala gaskets

You'd need to put some boost on there to see any power gains.

94/96ZsM6s

you will make the most of the CC306 wiht those heads, and you will really like that cam. in my 396 its great....still idles at 1k, good vac for brakes and creats a flat torque curve and is very lumpy even more so on yours since your only a 350...and the lower compression won't make much of a difference...

seawolf06

iTrader: (8)

Haha, yeah, going from 10.5:1 with a stock cam to a 10:1 with a cc306 won't make much of a difference at all!!!!