ReD95LT1

iTrader: (2)

So tonight we will begin tearing everything down and hopefully getting the springs swapped out as well.

We plan on doing as much as we can today and then finishing up on Friday.

Any tips on anything? Even the little things, just so we know what we are getting into.

Is there a special tool to remove the opti, thought i heard this somewhere?

Any comments would be greatly appreciated, thanks!

Joey

the_merv

iTrader: (88)

8mm socket I think to take it off, there is no special tool to remove the OPTI, there is one to actually take it apart.

ReD95LT1

iTrader: (2)

ok well i will have to take it off because i got an msd cap and rotor. so where can i get that tool?

Chased

no big deal just label everything if its your first time.....Done this a dozen times could do it in my sleep....

the_merv

iTrader: (88)

Yea, it's pretty easy to do, just remember to take the Lifters out. If you don't and pull the Cam, have fun getting the Oil Pan off.

ReD95LT1

iTrader: (2)

alright sounds good, i just got off work so ill be heading to my friends house shortly. he has done some ls1 cam swaps just not lt1. The cam will be arriving tomorrow at 4:30 and i am trying to get done by tomorrow at 8:00 so as long as everything comes out tonight and springs are swapped we should be good.

thanks!

Taubr Unit

iTrader: (32)

what cam you puttin in?