anybody every run the lunati 60122 cam?
#1
Launching!
Thread Starter
iTrader: (3)
Join Date: Feb 2004
Location: Walnutport, PA
Posts: 229
Likes: 0
Received 0 Likes
on
0 Posts
anybody every run the lunati 60122 cam?
has anybody ever run the lunati voodoo 60122 cam?
im building a vortec truck block for my chevelle, and am looking at this roller cam.. here are the specs..
from their site...
"Hydraulic Roller; Lopey idle, Great "street machine" cam Likes upgraded intake Carburetor and exhaust. Needs 9.5:1 or better compression and 2500 RPM stall speed converter and a 3.42 or better rear gear ratio."
* Advertised Duration IN/EX: 282/290
* Duration @ .050 IN/EX: 231/239
* Gross Valve Lift IN/EX: .535"/.550"
* LSA / ICL: 110/106
* Valve Lash IN/EX: Hyd/Hyd
* RPM Range: 2400-6200
here is the link to the cam card..
http://www.holley.com/data/Products/Technical/60122.pdf
so does anybody have any experience with this cam, or anything close to it?
thanks
aaron
im building a vortec truck block for my chevelle, and am looking at this roller cam.. here are the specs..
from their site...
"Hydraulic Roller; Lopey idle, Great "street machine" cam Likes upgraded intake Carburetor and exhaust. Needs 9.5:1 or better compression and 2500 RPM stall speed converter and a 3.42 or better rear gear ratio."
* Advertised Duration IN/EX: 282/290
* Duration @ .050 IN/EX: 231/239
* Gross Valve Lift IN/EX: .535"/.550"
* LSA / ICL: 110/106
* Valve Lash IN/EX: Hyd/Hyd
* RPM Range: 2400-6200
here is the link to the cam card..
http://www.holley.com/data/Products/Technical/60122.pdf
so does anybody have any experience with this cam, or anything close to it?
thanks
aaron