Power Steering Pump relocation bracket??
#1
Power Steering Pump relocation bracket??
The a/c and air/egr are going bye bye and I would ultimately like to relocate the ugly alternator to where the a/c and power steering pump are originally using a Madman bracket or the like. However these brackets intend that you are deleting the power steering in which I am not because I drive the car very often. I haven't had any luck searching myself so does anyone know of a bracket to relocate just the power steering pump itself to the driver's side?
thanks fellas
thanks fellas
#2
Launching!
iTrader: (2)
Join Date: Dec 2006
Location: kc
Posts: 254
Likes: 0
Received 0 Likes
on
0 Posts
Yeah I have a bracket that will do that.
Im actually selling all my peices I have for it. I have the bracket/hardware, clockwise rotation p/s pump(brand new remanufactured), with polished single grove pulley, and aluminum single groove pulley for the crank. I have just over 275 in the "kit" all together. Im wanting 225 out of it. But send me a pm and we can work out a deal if you want
I haven't even tried to set this up though so It might take a bit of fabricating.
this is what it should look like:
the bracket is different than that one but the pulleys and concept are pretty much exactly the same.
Im actually selling all my peices I have for it. I have the bracket/hardware, clockwise rotation p/s pump(brand new remanufactured), with polished single grove pulley, and aluminum single groove pulley for the crank. I have just over 275 in the "kit" all together. Im wanting 225 out of it. But send me a pm and we can work out a deal if you want
I haven't even tried to set this up though so It might take a bit of fabricating.
this is what it should look like:
the bracket is different than that one but the pulleys and concept are pretty much exactly the same.