recently installed clutch question - LS1TECH

Log In 

Manual Transmission
T56 | T5 | MN12 | Clutches | Hydraulics | Shifters
Sponsored by
McLeod Clutch

recently installed clutch question

Thread Tools Search this Thread
Old 07-19-2009, 05:57 PM   #1
TECH Fanatic
slayerized6's Avatar
Trader Rating: 12
Join Date: Oct 2006
Posts: 1,589
Default recently installed clutch question

i just recently had my ls7 clutch installed. i have about 80 miles on the setup right now. also got a new 01-02 updated gm slave, and had a RAM adjustable master installed about 4,000miles ago.

i just noticed today that when i step on the clutch and throw it into first (foot not on brake), the car moves just a little bit/jerks like 1-2 mm. its only noticeable when i focus on a tiny pebble with the door open. the car only moves when the shifter is moving. once the shifter is all the way in first with the clutch down, theres no movement. even if i rev the engine in 1st gear/clutch down, there is no movement. the car only moves when the synchros are engaging i guess.

i currently have my RAM master adjusted to the shortest pedal setting, but nothing changes if i adjust it to the tallest pedal setting.

car drives and shifts perfectly fine; i doubt there is any air in the system.

is this something i should be worried about?
slayerized6 is offline   Reply With Quote
Old 07-19-2009, 07:09 PM   #2
TECH Enthusiast
OffspringZ28's Avatar
Trader Rating: 8
Join Date: Jan 2006
Posts: 516
Send a message via AIM to OffspringZ28

if it is as minimal as you say its probably just the synchros engaging
OffspringZ28 is offline   Reply With Quote

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are Off


All times are GMT -5. The time now is 05:33 AM.