94LTZ

iTrader: (5)

I have a local guy that wants me to do this on his 01 T/A and i was just wondering where and how.

I know you unhook the braided line and drill out the orfic tube but what i don't know is where am i unhooking the line, and which side am i drilling the tube out of? pics would help to. thanks

RS_SS69

iTrader: (31)

You pull out the whole master disconnect the line from the master and that is where you drill it, then wash it out and reinstall, its really easy.

94LTZ

iTrader: (5)

Hmm doens't sound to bad, when Clint explained it to me earlier i got confused i guess cause i was at work and trying to do three things at once lol

99LS6SS

iTrader: (4)

I can't remember where I saw it at, but you don't want to drill it out too much. Search on google too. I think it's like 11/64th or something like that. I really can't remember, but yes it was easy. Take the entire MC out and punch out the roll pin that connects the line to the MC. Drill out the part that connects to the slave, clean, bench bleed, install

RS_SS69

iTrader: (31)

Its easy, clint did mine a long time ago, should be easy once you see what you have to do. Oh and make sure you flush the old fluid out and get some GM specific clutch fluid its the best out there.

94LTZ

iTrader: (5)

Cool guys, thanks for the info! I should of just text you matt lol

stoverz28

iTrader: (8)

Here is a link to the install university article, drill mod starts at step 16.

http://www.installuniversity.com/ins...sity/index.htm