Bjorne043

iTrader: (1)

I'm beginning to put together the pieces to rebuild my transmission. I currently have a grind from 2-3 and 4-5 when I'm running it hard. I also get grind when I put it in reverse just about every time.

My question is where are people getting their reubild kits? What brands are good, who to order it from?

Also will a standard rebuild hold over 400 WHP?

What has everyone used?

LS123

iTrader: (11)

For do it yourselfers, I would recommend Tick Level II. Holds 600 RWTQ. They are forum vendors and many members have used their kit with great results.

Tick

Bjorne043

iTrader: (1)

I'm checking them out but they only list prices with their labor. I'm trying to find their price for just the parts

LS123

iTrader: (11)

Complete Kits


--------------------------------------------------------------------------------
Tick Performance Level 2 T56 Rebuild Parts
Looking to rebuild your own T56 and want an all-inclusive parts kit that won't leave you wondering if you'll have what you need to put your transmission back together? Look no further. This is the exact kit we install in every Level 2 T56 Rebuild that we do. The kit includes:

Bronze 1-2 Fork Pads
Bronze 3-4 Fork Pads
OEM 5-6 Fork Pads
OEM Reverse Fork Pads
Billet 3-4 Synchronizer Keys (with upgraded springs)
Carbon Fiber Synchronizer (blocker) Rings
Steel 3-4 Shift Fork
New 1-2 Synchronizer Assembly
New 3-4 Synchronizer Assembly
New Front Seal
New Rear Seal
It may be in your best interest to wait until you've got your transmission torn down before ordering the kit to make sure you don't need any additional parts (New 5-6 Synchronizer Assembly, etc).




Part # Description Price

TPL2P Tick Performance Level 2 F-Body T56 Rebuild Parts Kit $629.99 buy

jmm98LS1

iTrader: (28)

You really shouldn't buy any parts until you get the trans torn down/inspected. No reason to buy stuff you don't need or have to make another order because you have some trashed parts not included in "kits".

71novaguy

iTrader: (2)

why not replace it while your there? So what if it gives you a few more parts? Take the extra minutes and replace it.

draggin97s10

iTrader: (2)

maybe b/c it takes 45 minutes to an hour to full drop and pull the transmission out from under the car and set it on the bench, and thats without a lift

draggin97s10

iTrader: (2)

but i see your point of view too

Bjorne043

iTrader: (1)

I think this is a good idea. I think its smart to see what I need before I order anything because I'd hate to find out that i dont have enough stuff to finish the job