jonathan_ed3

iTrader: (4)

Okay I feel really really dumb here. Tried to search but it must be so remedial nobody else has this problem.

How in the WORLD do you remove the braided clutch line from the slave?

I have the "tool".... http://www.speedwaymotors.com/T56-Cl...Tool,8810.html but I'm not sure what I'm doing wrong.

How do I use this "tool" to remove the braided clutch line from the slave? Please someone school me!

southpaw0314

iTrader: (5)

are you pushing the tool down on one side then slidding it to the other side to free it?

jonathan_ed3

iTrader: (4)

I have absolutely no idea what to do with it. I feel like a baby trying to shove a square block into a circle cut out.

southpaw0314

iTrader: (5)

are you pushing the plastic piece into the slave cylinder on all sides. i have never used the tool i used 2 flat head screw drivers and pushed in the piece.

jonathan_ed3

iTrader: (4)

So push the nylon piece in towards the slave all around the perimeter at one time and it should release?

the_merv

iTrader: (88)

Yes..it works kinds like the Fuel Line Quick-disconnects.

RPS13

iTrader: (9)

dont feel bad I had the same question