what slave cylinder do I get for my ls7 clutch setup in my ls1?
03-05-2010, 07:56 PM
#1
TECH Enthusiast
Thread Starter
iTrader: (2)
Join Date: Oct 2008
Location: Fresno, CA
Posts: 691
Likes: 0
Received 0 Likes
on
0 Posts
what slave cylinder do I get for my ls7 clutch setup in my ls1? I just bought a brand new ls7 clutch kit with a flywheel from ky speed. I'm trying to get all my things together for this swap.
The car has 144k miles so its time for a new clutch anyway. Im gonna use an ls1 slave that Im gonna do the drill mod to before it gets installed.
Im also going to get a new slave but Im not sure which one. I found two:
http://kentucky-speed.com/advanced_s...1e9f1&x=9&y=16
Im thinking of getting the GM 98-02 F-Body Slave Cylinder but I need confirmation that it will work with the ls7 clutch...
The car has 144k miles so its time for a new clutch anyway. Im gonna use an ls1 slave that Im gonna do the drill mod to before it gets installed.
Im also going to get a new slave but Im not sure which one. I found two:
http://kentucky-speed.com/advanced_s...1e9f1&x=9&y=16
Im thinking of getting the GM 98-02 F-Body Slave Cylinder but I need confirmation that it will work with the ls7 clutch...
