Manual Transmission T56 | T5 | MN12 | Clutches | Hydraulics | Shifters

Ok getting close with this shift light.

Old 03-29-2010, 09:02 PM
  #1  
11 Second Club
Thread Starter
iTrader: (3)
 
MattHatt89's Avatar
 
Join Date: Dec 2007
Posts: 58
Likes: 0
Received 0 Likes on 0 Posts

Default Ok getting close with this shift light.

I have the raptor shift light with launch mode and its stuck in lanuch mode. I think the problem is with the VSS wire but theres two, PIN 20 and 21 are both VSS but ones low signal and the other is high signal. Which one is the one to use??
Old 04-08-2010, 12:02 AM
  #2  
Teching In
iTrader: (1)
 
Raptor's Avatar
 
Join Date: Jul 2003
Posts: 7
Likes: 0
Received 0 Likes on 0 Posts

Default

You'll want the VSS output. Those two wires you mentioned are the input.

VSS Output: PCM red connector (pin #50, dark green wire with white stripe).


Thread Tools
Search this Thread
Quick Reply: Ok getting close with this shift light.



All times are GMT -5. The time now is 10:46 PM.