my twin slipped :/
06-27-2010, 04:23 PM
#1
TECH Apprentice
Thread Starter
iTrader: (4)
Join Date: Apr 2010
Posts: 363
Likes: 0
Received 0 Likes
on
0 Posts
my twin slipped :/ I have a fidanza twin disk 6.5 kit. less then 2k on it
Did a high rpm dump in first gear and the thing slipped bad...
Then a few miles later I tried to do a 2nd to 3rd shift at 6k and it slipped again and I let right off.
Is this thing toast? Or is there a chance it will cool off and after a few miles of normal driving and grab again.
Ive also heard oil from the rear main seal can leak and get flung around and get onto the disk. What are the chances of this?
any input is helpfull.
thanks
Did a high rpm dump in first gear and the thing slipped bad...
Then a few miles later I tried to do a 2nd to 3rd shift at 6k and it slipped again and I let right off.
Is this thing toast? Or is there a chance it will cool off and after a few miles of normal driving and grab again.
Ive also heard oil from the rear main seal can leak and get flung around and get onto the disk. What are the chances of this?
any input is helpfull.
thanks
06-28-2010, 02:56 PM
#2
TECH Apprentice
Thread Starter
iTrader: (4)
Join Date: Apr 2010
Posts: 363
Likes: 0
Received 0 Likes
on
0 Posts
well after a overnight cool down the clutch seems to grab again..
did some wot 2nd,3rd and 4th gear shifts
But im still nervous , it did not like to be launched ...
could be just to much beating at one time...?
Ill keep you guys updated
did some wot 2nd,3rd and 4th gear shifts
But im still nervous , it did not like to be launched ...
could be just to much beating at one time...?
Ill keep you guys updated