1Ls1

iTrader: (20)

GOt a 2000 camaro, new gm slave, new gm pre bleed master cylinder with new stainless steel line, and new ls6 clutch kit, pedal still sticking, i dunno what to do. any ideas...... i replaced the master and slave 2 times. car just has 400hp

feels great when im crusin, pedal is firm, only when i floor it, it gets stuck. its already at the floor when i floor it

Parasoth

iTrader: (1)

Get a real Master Cylinder & stainless line (RE: Tick) and stop messing with the stock GM crap. Guarantee this is your problem and will continue to be your problem.

1Ls1

iTrader: (20)

im gonna listen to you and buy a tick, i have no other choice, and i want to keep the car.

DaddySS

Did it stick to the floor immdiately after you replaced it?

1Ls1

iTrader: (20)

no, it feels fine, and seems to shift fine, up until i floor it or dump the clutch, the pedal goes to the floor and wont let me in the next gear. seems like its full of pressure, engages about half way when driving normal.

DaddySS

I would flush the fluid and bleed it before I tried anything else.

4WOFURY

iTrader: (2)

Do the drill mod.

1Ls1

iTrader: (20)

its brand new fluid that came in the new gm pre bleed masater cylinder, your not suppose to bleed it when you put it in.

Mr.4mulabird

+1 for drill mod

jmd

iTrader: (4)

drill mod + jmd method on the bleeding and you'd be good.

Sorry you stocked it up.