Joey and ALL at TICK...
12-16-2010, 07:51 PM
#1
Joey and ALL at TICK... Just wanted to say thanks again!
I called Joey Monday as i had a problem with my master. Somehow the rod that you adjust had gotten bound up, and stripped out. I was having a problem power shifting about every 5-8 times or so; so i went to make a minor adjustment on the master. A TINY turn and BAM it falls off. WTF. I look at the end (the end that goes into the pedal) and it's all chewded up. However before the last 2 months or so it had been working flawless like always, so i really don't know what exactly happened as the nuts were still tight on both the ends. Anyhow, Joey sent me a new one NO questions asked. Ordered Monday afternoon here Thursday. I make plently of posts prasing my tick master, speed bleeder, and level 2 rebuild, and i have too when a company takes time to believe in customer service. Too many guys out there could care less about your problems after they get their coin.
So props to Tick. Monster is another good one. Those are the only 2 i personally reccomend in the 6sp department.
I called Joey Monday as i had a problem with my master. Somehow the rod that you adjust had gotten bound up, and stripped out. I was having a problem power shifting about every 5-8 times or so; so i went to make a minor adjustment on the master. A TINY turn and BAM it falls off. WTF. I look at the end (the end that goes into the pedal) and it's all chewded up. However before the last 2 months or so it had been working flawless like always, so i really don't know what exactly happened as the nuts were still tight on both the ends. Anyhow, Joey sent me a new one NO questions asked. Ordered Monday afternoon here Thursday. I make plently of posts prasing my tick master, speed bleeder, and level 2 rebuild, and i have too when a company takes time to believe in customer service. Too many guys out there could care less about your problems after they get their coin.
So props to Tick. Monster is another good one. Those are the only 2 i personally reccomend in the 6sp department.
