So what the best clutch set for LT1's????
#1
Teching In
Thread Starter
iTrader: (2)
Join Date: Dec 2010
Location: Danville,PA
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
So what the best clutch set for LT1's????
Well all I seem to find is LS1 set ups. What the best set up for a LT1 car. I have a 96 with a hand full of mods. It ran 12.80 at 113 this past summer. But after the third pass the clutch would slip in 3rd and 4th gear. I want to upgrade the clutch this winter what should I go with?
#6
Teching In
Thread Starter
iTrader: (2)
Join Date: Dec 2010
Location: Danville,PA
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Here is my list of mods: 355 cid, Comp Cams 503, LS7 Lifters, Comp 1.6 RR's, 64cc aluminum heads, MSD 6AL, 160 thermostat, 52mm Mike Blum Throttle Body, Lingenfelter CAI, Ceramic Coated Hooker LT's, Magnaflow Catback, 3" DMH Cutout, EGR & Cat Delete,
I'm thinking about a little spray in the future about 100 shot.
As for budget well I only want to do it once....
I'm thinking about a little spray in the future about 100 shot.
As for budget well I only want to do it once....
#8
Here is my list of mods: 355 cid, Comp Cams 503, LS7 Lifters, Comp 1.6 RR's, 64cc aluminum heads, MSD 6AL, 160 thermostat, 52mm Mike Blum Throttle Body, Lingenfelter CAI, Ceramic Coated Hooker LT's, Magnaflow Catback, 3" DMH Cutout, EGR & Cat Delete,
I'm thinking about a little spray in the future about 100 shot.
As for budget well I only want to do it once....
I'm thinking about a little spray in the future about 100 shot.
As for budget well I only want to do it once....
best of both worlds would be a twin..which moves you fom a $500-$600 single disc to a $1000 for a twin