FCar2000TA

iTrader: (7)

I am going to be sending my McLeod Street-Twin in to be rebuilt, but I have no idea how to box it up. It is pretty heavy, so any ideas??

1CAMWNDR

iTrader: (21)

Build or have built a mulit level wood crate. Drill holes in different levels to bolt pressure plate, flywheel and floater to. Put one disc under the pressure plate, one disc under the flywheel. pack it with foam and nail on a lid.

TDP

iTrader: (23)

I ship clutches all the time and found the most simple method is to use a box that's 15" x 15" x 5" or somewhat close to that. Pack it good with newspaper, cardboard, etc. You just don't want it to move around or bust thru the box during shipping.