LS7 clutch with slicks?
#2
11 Second Club
iTrader: (7)
Join Date: Aug 2003
Location: Weeksbury, Ky
Posts: 302
Likes: 0
Received 0 Likes
on
0 Posts
here is a link of my buddies Cam Only car, full weight with an LS7 clutch on slicks with a 9 inch...
http://www.youtube.com/watch?v=IkvLeu4bnLU
http://www.youtube.com/watch?v=IkvLeu4bnLU
#4
TECH Enthusiast
iTrader: (13)
Join Date: Apr 2007
Location: Phiadelphia Ms. to Houston Tx.
Posts: 605
Likes: 0
Received 0 Likes
on
0 Posts
i had a 378rwhp cam and 100shot car with moser 9" and 26/11.5/15 MT et streets and let it bounce off the 6800 rev limiter about 4 times before going off the side of the clutch and i cut 1.50 to 1.55 short times and ran 10.8 twice but it was a 11.2 car more consitantly and drove it all the time and to work with was from philadelphia ms to galveston tx at the time and the LS7 clutch did great so good luck
#7
TECH Junkie
iTrader: (9)
I pounded the **** out of mine for three seasons. Many 7K dumps and typically hit 1.6x short times. It held great but smelled burnt often at the track. I am doing a new LS3 build now so I bought a Tex to replace it BUT man the dang LS7 clutch still looks mint. Its hasnt even worn off the fiber roughness in over half of the disk.
For a street car in the 400 whp range? Cant beat the LS7 clutch imo
For a street car in the 400 whp range? Cant beat the LS7 clutch imo
Trending Topics
#10
TECH Senior Member
iTrader: (10)
Join Date: May 2005
Location: Bossier city,LA barksdale AFB
Posts: 5,355
Likes: 0
Received 2 Likes
on
2 Posts
Just Dont hot lap it. It Cant handle heat like race clutches. I have 413whp and 40+k miles on mine and its due. Look at the diamond stage two its just like the ls7 but stronger. What Im going with next.