MONSTER Clutch 2011 Tax Season Sale!!
#1
MONSTER Clutch 2011 Tax Season Sale!!
All clutches are $100 off with free shipping! Whether you're stock or making 950rwhp, we've got a clutch for you! Our Basic kits come with a Billet 28lb flywheel(there is an option for an 18lb upgrade), Pressure Plate, Disc, Pilot Bearing, and Alignment tool to get the job done. If you step up to our Premium kit you will recieve a GM Slave cylinder with Release Bearing based upon your application. You can also upgrade to a Remote Speed Bleeder for $49.99 and new flywheel/pressure plate bolts are only $19.99 extra. Don't forget our clutches come with a 1 year/unlimited mileage warranty against manufacture defect, so don't be afraid to use them as they were intended! Feel free to give me a call and I'll help get you in the right clutch!
Chris, 817-750-2000
Chris, 817-750-2000
Last edited by SNLPerformance; 05-02-2011 at 12:49 PM.
#5
Staging Lane
iTrader: (7)
Join Date: Apr 2010
Location: Jefferson City, MO
Posts: 62
Likes: 0
Received 0 Likes
on
0 Posts
Very interested in this! Im looking at getting the level 2 premium kit but im undecided on the flywheel. My setup will be street driven alot with some hard launches at the track on drag radials several times a year. The engine is a ls1, 243 heads, ls6 intake, and probably gonna be using torquer v2 cam.
#7
Very interested in this! Im looking at getting the level 2 premium kit but im undecided on the flywheel. My setup will be street driven alot with some hard launches at the track on drag radials several times a year. The engine is a ls1, 243 heads, ls6 intake, and probably gonna be using torquer v2 cam.
Trending Topics
#10
11 Second Club
iTrader: (18)
Join Date: Mar 2007
Location: Eastern Ma/ PSL florida
Posts: 845
Likes: 0
Received 9 Likes
on
4 Posts
Loving my stg 3 with 28lb flywheel for over a year now in my 3700lb camaro. Ripped into the 10s finally at the begining of the year. Best clutch hands down. Once the new motor goes in over the winter I will be ordering another one. Only I might need something a little stronger this time. Hahaha.
#11
Loving my stg 3 with 28lb flywheel for over a year now in my 3700lb camaro. Ripped into the 10s finally at the begining of the year. Best clutch hands down. Once the new motor goes in over the winter I will be ordering another one. Only I might need something a little stronger this time. Hahaha.
#14
It isn't bad. It's definitely streetable but you have to remember, this is a puck design it isn't going to feel COMPLETELY like a stock gm clutch.
Stage 3 is usually our standard that well have sold to all our customers. If you have further questions we or SNL will be more than happy to answer your questions.
Stage 3 is usually our standard that well have sold to all our customers. If you have further questions we or SNL will be more than happy to answer your questions.
#19
The sintered iron uses a very aggresive friction material that isn't designed for a lot of street use. Remember our clutches are rated at the rear wheels, unlike other manufacturers, how much power are you making? The 11" Ceramic would be better suited for the street and will hold 825rwhp.
#20
My C5 has gone 11.03 with a Level 2, but it's raceweight is only 3100. If you've got a built rearend then I would go Level 3. The Basic kit is on sale for 629.99 shipped, but remember without the purchase of our slave if yours fails and contaminates the disc it will not be covered under warranty.