Manual Transmission T56 | T5 | MN12 | Clutches | Hydraulics | Shifters

Vibration in gas petal...

Old 06-29-2011, 05:35 PM
  #1  
TECH Regular
Thread Starter
iTrader: (1)
 
thegodfather899's Avatar
 
Join Date: Jul 2009
Location: Milwaukee, WI
Posts: 492
Likes: 0
Received 1 Like on 1 Post
Default Vibration in gas petal...

Hey guys,
i kept getting a weird vibration in my gas petal when i ran it hard or dumped the clutch a little more than normal only in 1st gear. i changed the clutch (which had burn marks on the pressure plate), slave cylinder, and clutch master cylinder. After put together again, i still have the problem mostly in the gas petal when i dump the clutch a little more than normal. it feels like something is slipping or rubbing. I also feel a little vibration in the clutch petal under normal driving. Are these two related? any ideas? Thanks!!
Old 06-30-2011, 10:47 PM
  #2  
TECH Regular
Thread Starter
iTrader: (1)
 
thegodfather899's Avatar
 
Join Date: Jul 2009
Location: Milwaukee, WI
Posts: 492
Likes: 0
Received 1 Like on 1 Post
Default

anybody have a clue?
maybe throw out bearing or unbalanced clutch/flywheel or something?
Old 06-30-2011, 11:56 PM
  #3  
Teching In
 
mob_barley's Avatar
 
Join Date: Jun 2011
Posts: 30
Likes: 0
Received 0 Likes on 0 Posts
Default

got the same problem, although i seem to have other tranny problems too...
Old 07-13-2011, 05:37 PM
  #4  
TECH Regular
Thread Starter
iTrader: (1)
 
thegodfather899's Avatar
 
Join Date: Jul 2009
Location: Milwaukee, WI
Posts: 492
Likes: 0
Received 1 Like on 1 Post
Default

turns out the vibration was a bad pilot bearing in case anyone has this problem


Thread Tools
Search this Thread

All times are GMT -5. The time now is 05:55 PM.