Hey guys well almost there.....
#1
Launching!
Thread Starter
Join Date: Dec 2008
Location: SAN DIEGO
Posts: 209
Likes: 0
Received 0 Likes
on
0 Posts
Hey guys well almost there.....
Hey guys well i posted a clutch problem about a week ago i changed my slave and my master cylinder bled the system but still have the same problem not sure maybe i need the mity vac but as before i start the car in nuetral will not go into any gear the way its suppose to, i put it in gear while its off and start it the car moves foward while it cranks then it starts and runs but very difficult to get into gear sometimes it will go in the gears when i double press the clutch, but not so easy it still seems to grind the only thing that i havnt changed would be the braided line going from the master to the slave and the rubber one going from the resevoir to the master, i still think its akward how i was driving it perfectly fine the day before.... I came home parked it in the garage next morning try to goto the store it wouldnt go into gear.... Please any advice would be great id hate to drop the tranny again lol