Manual Transmission T56 | T5 | MN12 | Clutches | Hydraulics | Shifters

T56 rebuild

Thread Tools
 
Search this Thread
 
Old 08-15-2011, 07:15 PM
  #1  
Teching In
Thread Starter
 
99ws6bk's Avatar
 
Join Date: Jan 2011
Posts: 6
Likes: 0
Received 0 Likes on 0 Posts

Default T56 rebuild

long story short im having difficulty gettin into 6th, it'll grind and will only go in if i hold a substantial amount of pressure on the shifter and slowly let the clutch out, it grinds for a short moment but pops in(i kno i kno... i cringe too), or if i rip the shifter really hard itll go in with no grind. i guess if it had to happen im glad it did now as i also have the 'sticking clutch pedal' at high rpm and was about to begin with a new clutch/slave, basically i live in london ontario canada and am looking for someone/somewhere somewhat local that i can trust with my trans, im guessing somewhere in toronto there will be atleast one place but ive had no luck in searching so far, any help would be greatly appreciated
Old 08-16-2011, 07:55 AM
  #2  
FormerVendor
iTrader: (12)
 
Jeremy@RPMTransmissions's Avatar
 
Join Date: Sep 2010
Location: Anderson Indiana
Posts: 1,553
Likes: 0
Received 1 Like on 1 Post
Default

We aren't that local to you but we get great shipping rates. We would be happy to repair your transmission or build you an exchange unit so your car doesn't have to be down very long. Just let me know. We would be happy to help you out.



Quick Reply: T56 rebuild



All times are GMT -5. The time now is 01:15 AM.