what have I gotten myself into...
10-10-2011, 08:05 PM
#1
On The Tree
Thread Starter
Join Date: Apr 2009
Location: Central Florida
Posts: 177
Likes: 0
Received 0 Likes
on
0 Posts
what have I gotten myself into... pulling my T56 apart.. was leaking bad before, and the input shaft is rounded off, here is as far as I got tonight..
those damn faceplate bolts were a m'fer.. 1/2 ratchect and the jack handle and it still wasnt easy..
those damn faceplate bolts were a m'fer.. 1/2 ratchect and the jack handle and it still wasnt easy..
10-10-2011, 09:01 PM
#2
Staging Lane
iTrader: (4)
Join Date: Apr 2007
Location: Goodlettsville, TN
Posts: 57
Likes: 0
Received 0 Likes
on
0 Posts
Good Luck
I just pulled my t-56 apart and expected some carnage during the tear down. Time to buy a new input shaft. Well at least you will get a new fourth gear.
I haven't put mine on the road, so I don't know how it turned out. Following the service manual will take you through the whole deal.
I just pulled my t-56 apart and expected some carnage during the tear down. Time to buy a new input shaft. Well at least you will get a new fourth gear.
I haven't put mine on the road, so I don't know how it turned out. Following the service manual will take you through the whole deal.
10-10-2011, 09:19 PM
#3
On The Tree
Thread Starter
Join Date: Apr 2009
Location: Central Florida
Posts: 177
Likes: 0
Received 0 Likes
on
0 Posts
Good Luck
I just pulled my t-56 apart and expected some carnage during the tear down. Time to buy a new input shaft. Well at least you will get a new fourth gear.
I haven't put mine on the road, so I don't know how it turned out. Following the service manual will take you through the whole deal.
I just pulled my t-56 apart and expected some carnage during the tear down. Time to buy a new input shaft. Well at least you will get a new fourth gear.
I haven't put mine on the road, so I don't know how it turned out. Following the service manual will take you through the whole deal.
Last edited by stephen4036; 10-10-2011 at 09:27 PM.
