Clutch and pressure plate
02-15-2012, 01:33 AM
#1
Teching In
Thread Starter
Join Date: Nov 2007
Location: Vancouver Canada area
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
Clutch and pressure plate Have an 01 T56 and a 98 and up LS1. The motor still has the ,14" diameter, flexplate on the motor. I am have purchased a T56 , and now need the pressure plate and clutch to connect the 2.
I have 2 flywheel, also 14" diameter, but am told that I need a 11" flywheel. I sandblasted and counted the teeth on the flywheel and came up with 167 teeth?
From what i have seen online these are not the right one.
Please help as my 67 camaro comes back from paint next week and I want to install motor and tranny together when the car returns.
Thanks in advance..
I have 2 flywheel, also 14" diameter, but am told that I need a 11" flywheel. I sandblasted and counted the teeth on the flywheel and came up with 167 teeth?
From what i have seen online these are not the right one.
Please help as my 67 camaro comes back from paint next week and I want to install motor and tranny together when the car returns.
Thanks in advance..
