T56 install issues...
#1
12 Second Club
Thread Starter
iTrader: (2)
Join Date: Feb 2011
Location: Galveston, IN
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
T56 install issues...
Anyonoe have tips on gitting a t56 back in... Im having trouble getting the splines on the clutch to line up with the imput shaft... Im working alone so that dosnt help matters...
Thanks
aaron
Thanks
aaron
#3
i did mine alone . balanced it on a floor jack,put the trans in gear to spin main shaft. and just kinda worked it in . you have to mess with it but be careful also put a thin film of grease on the alignment dowels so they dont seize.