Clutch disengagement different after new clutch
04-12-2012, 11:01 PM
#1
11 Second Club
Thread Starter
iTrader: (11)
Join Date: Jul 2007
Location: Kentucky
Posts: 316
Likes: 0
Received 0 Likes
on
0 Posts
Clutch disengagement different after new clutch I installed a new clutch and slave with a remote bleeder. I have Bled the Bejesus out of it. Like 5 or 6 master cyl. full.
The problem is, my old clutch would disengage almost right at the top. I could press it in not but two or three inches and it would disengage. Now it wont disengage until about 60-70% travel.
Do I still have air in the system?
01 c5 stock mc, sc, remote bleeder and spec stage 3.
The problem is, my old clutch would disengage almost right at the top. I could press it in not but two or three inches and it would disengage. Now it wont disengage until about 60-70% travel.
Do I still have air in the system?
01 c5 stock mc, sc, remote bleeder and spec stage 3.
