LS1TECH - Camaro and Firebird Forum Discussion

Manual Transmission T56 | T5 | MN12 | Clutches | Hydraulics | Shifters

t56

Thread Tools
 
Search this Thread
 
Old 04-21-2012, 11:43 PM
  #1  
Registered User
Thread Starter
 
rgarner~z28's Avatar
 
Join Date: Apr 2012
Posts: 10
Likes: 0
Received 0 Likes on 0 Posts
Default t56
i just bought a 2000 z28 when you drive it right it shifts fine when you get on it dont want take 2nd gear and grinds when you go to 4th
rgarner~z28 is offline  
Reply Like
Old 04-22-2012, 03:51 PM
  #2  
Registered User
Thread Starter
 
rgarner~z28's Avatar
 
Join Date: Apr 2012
Posts: 10
Likes: 0
Received 0 Likes on 0 Posts
Default
anyone maybe slave cylinder?
rgarner~z28 is offline  
Reply Like
Old 04-22-2012, 07:16 PM
  #3  
Banned
iTrader: (60)
 
thesource's Avatar
 
Join Date: Mar 2005
Location: Adkins - Tx
Posts: 2,693
Likes: 0
Received 0 Likes on 0 Posts
Default
Could be a bad pilot bearing, bad 4th gear syncro, bad slave cylinder for maybe the shifter stop has worked loose if its an after market shifter.
thesource is offline  
Reply Like
Old 04-22-2012, 08:05 PM
  #4  
Registered User
Thread Starter
 
rgarner~z28's Avatar
 
Join Date: Apr 2012
Posts: 10
Likes: 0
Received 0 Likes on 0 Posts
Default
Originally Posted by thesource
Could be a bad pilot bearing, bad 4th gear syncro, bad slave cylinder for maybe the shifter stop has worked loose if its an after market shifter.
it is stock shifter and i can change gears with out the clutch with no grinding so dont think its syncro
rgarner~z28 is offline  
Reply Like
Tags
Back to Subforum
Manual Transmission
View Next Unread
Clutch Help / Transmission Build




Advanced Search
Quick Reply: t56


Reply Closed Thread Share

All times are GMT -5. The time now is 12:55 AM.