Monster Flywheel 28lb after 5k miles
#1
Teching In
Thread Starter
Join Date: Jun 2011
Location: Hamilton, ON, Canada
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
Monster Flywheel 28lb after 5k miles
Is this normal wear after 5k miles? I properly broke it in . using their stage 3 ceramic sprung clutch. i put the flywheel on a granite surface plate and am measuring 1 thou runout on the face of the flywheel. i measured the thickness of the flywheel with a micrometer as well. not much deviation.
would appreciate any opinions. really don't want to have to pull the trans down the future.
would appreciate any opinions. really don't want to have to pull the trans down the future.
#6
TECH Senior Member
iTrader: (39)
FWIW that's about what my stage 2 looked liked after about 3k miles. I had a few dark spots on mine that I don't know why they are there. I don't slip it. Anyhow I put it back in when the engine went back together. I beat the **** out of it and the only thing that slips is the back tires.