1997

I have a 2000 Camaro ss with t56. I had very little clutch pressure and I have to pump it up 6-7 times to get it to go into gear.so I looked and the fluid it was really dirty. So I got it out and put new in fluid in it and bleed it until I had straight fluid coming out I used almost a pint of brake fluid. It got a little better but I still have to pump it up 4-5 times to get it in gear and I'm not losing fluid. Could my slave cylinder be bad ? Please help.

redbird555

iTrader: (14)

post this up in the manual section to get more replies. but it sounds like the master and or slave has gone bad. unplug the master from the slave and see if the pedal can be compressed