need some input build my t56 or go magnum
#1
Staging Lane
Thread Starter
Join Date: Jun 2014
Location: brainerd mn
Posts: 98
Likes: 0
Received 0 Likes
on
0 Posts
need some input build my t56 or go magnum
well i can sell my t56 for 1650 best offer iv got so far and looking at the tick stage 4 tr-6060 conversion for 4500
power goal is 700 whp street car may see some drag auto x road course and its in a 240sx power may go up have plenty of room to grow just not 100% sure i wanna drop 4500 into a trans but then i know it will handle what ever i throw at it otherwise i was thinking about going with tdp stage 3 for my t56 but for another grand why not a tr6060
or maybe even a stock one since u can get em for 3k
power goal is 700 whp street car may see some drag auto x road course and its in a 240sx power may go up have plenty of room to grow just not 100% sure i wanna drop 4500 into a trans but then i know it will handle what ever i throw at it otherwise i was thinking about going with tdp stage 3 for my t56 but for another grand why not a tr6060
or maybe even a stock one since u can get em for 3k
Last edited by ben husen; 03-22-2015 at 11:22 PM.
#2
9 Second Club
If the T56 needs a lot of work, hard to say it is worth rebuilding, especially as many parts are getting harder to find
If it doesnt need work...just use it as is ? What's actually wrong with it ?
If it isnt already fitted in the conversion, just buy a regular Magnum that will fit best as opposed to an F-Body specific Magnum which needs custom built.
If it doesnt need work...just use it as is ? What's actually wrong with it ?
If it isnt already fitted in the conversion, just buy a regular Magnum that will fit best as opposed to an F-Body specific Magnum which needs custom built.
#3
Staging Lane
Thread Starter
Join Date: Jun 2014
Location: brainerd mn
Posts: 98
Likes: 0
Received 0 Likes
on
0 Posts
If the T56 needs a lot of work, hard to say it is worth rebuilding, especially as many parts are getting harder to find
If it doesnt need work...just use it as is ? What's actually wrong with it ?
If it isnt already fitted in the conversion, just buy a regular Magnum that will fit best as opposed to an F-Body specific Magnum which needs custom built.
If it doesnt need work...just use it as is ? What's actually wrong with it ?
If it isnt already fitted in the conversion, just buy a regular Magnum that will fit best as opposed to an F-Body specific Magnum which needs custom built.