how to measure clutch disc
06-16-2005, 09:37 AM
#1
Teching In
Thread Starter
iTrader: (-1)
Join Date: Feb 2005
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
how to measure clutch disc I just bought a spec stage 3 used. the flywheel and pressure plate have been resurfaced. I was wondering it there were certain specs for the disc that I could measure and see how much life is left on the clutch. any ideas
also the pp on the clutch is painted yellow instead of the usual blue has anyone seen this
also the pp on the clutch is painted yellow instead of the usual blue has anyone seen this
06-16-2005, 09:41 AM
#2
Teching In
Thread Starter
iTrader: (-1)
Join Date: Feb 2005
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 2000bean
I just bought a spec stage 3 used. the flywheel and pressure plate have been resurfaced. I was wondering it there were certain specs for the disc that I could measure and see how much life is left on the clutch. any ideas
also the pp on the clutch is painted yellow instead of the usual blue has anyone seen this
also the pp on the clutch is painted yellow instead of the usual blue has anyone seen this
customer brought in 2- SC093 & two factory flywheels , upgraded SC093 to SC095, inspected SC093 & factory flywheel, resurfaced both flywheels
SC733--RESET SELF-ADJUSTING MECHANISIM, PRESSURE = 2657psi
LIFT = 1.12; 1.03; 1.08 @ .250 TRAVEL -- DISC .340 THICK
TOTAL WEAR ON UNIT APPROX. .020-.025 -- REBALANCED UNIT
WITH FLYWHEEL
CHARGE SHIPPING ONLY on one unit only - customer picked up one unit already BW
invoice #21030
06-16-2005, 11:52 AM
#4
Teching In
Thread Starter
iTrader: (-1)
Join Date: Feb 2005
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
i believe this clutch is worn out. I want to make sure before i install it. The throwout bearing he gave me isnt new like it was suppose to be either its used. anyone know how to tell if this clutch is any good
