Manual Transmission T56 | T5 | MN12 | Clutches | Hydraulics | Shifters

Spec clutch

Thread Tools
 
Search this Thread
 
Old 07-07-2005, 09:15 AM
  #1  
Teching In
Thread Starter
iTrader: (3)
 
bottlebabyWS6's Avatar
 
Join Date: May 2005
Location: Saint Petersburg, Florida
Posts: 25
Likes: 0
Received 0 Likes on 0 Posts
Default Spec clutch

Does any body have any personall experience about putting a stage three together with a fidannaza aluminum flywheel and have a bit of a shake at about 60 because the two were not a balanced assembly together like spec offers.
Old 07-07-2005, 09:48 AM
  #2  
LS1Tech Sponsor
iTrader: (12)
 
Slowhawk's Avatar
 
Join Date: Nov 2001
Location: Bridgewater,Ma
Posts: 14,865
Likes: 0
Received 6 Likes on 6 Posts

Default

Originally Posted by bottlebabyWS6
Does any body have any personall experience about putting a stage three together with a fidannaza aluminum flywheel and have a bit of a shake at about 60 because the two were not a balanced assembly together like spec offers.
If it's unbalanced it won't be by speed but by RPM. And yes the Fidensa's alway's seem to need balancing.




All times are GMT -5. The time now is 11:26 AM.