RW99

... I ask because my virtually new McLeod adjustable is apparently having problems... and I hear that I'm not the only McLeod owner suffering. Yes, drill mod was done. If you want details, the thread is

https://ls1tech.com/forums/manual-transmission/372766-diagnose-problem-mcleod-adj-master.html

Anyway, I just thought I'd ask which master and slave cylinders seem to be working on clutches handling some decent power. I'm looking for the trouble-free setup here that will work well with a RAM VDS980 setup.

And if you have a trouble-free McLeod, when did you put it in the car? (I'm wondering if something has changed with this unit over time).

Thanks for any info...

Rich

RW99

Anyone using the RAM adjustable?

Aaron's 00 TA

iTrader: (6)

I'm looking for the same info. I'm debating which master cylinder to get.

RW99

RAM adjustable going in this week. I'll post with results and perhaps a post mortem on the McLeod.

Rich

68ss_00ss_87_95

iTrader: (1)

i got the mcleod master cylinder installed about 2 weeks ago with a stock slave cylinder for my 00ss....i havent encountered any problems yet and ive done 5 passes and driven about 1000 miles...whats the problem with yours?

RW99

Check the link on the top post. Mine performed perfectly for the first couple of months before demonstrating the pedal return problems.