ram powergrip hd or not
09-27-2005, 01:19 PM
#1
Teching In
Thread Starter
Join Date: Jun 2005
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
ram powergrip hd or not Called Ram today and they recomended the powergrip to me, not the HD??
Told them the car was making about 400 rwhp, and would see alot of track
and street time.
What do you think hd or not????????
Told them the car was making about 400 rwhp, and would see alot of track
and street time.
What do you think hd or not????????
09-27-2005, 02:51 PM
#2
8 Second Club
iTrader: (18)
Join Date: Oct 2002
Location: Waterloo, Ontario
Posts: 2,609
Likes: 0
Received 0 Likes
on
0 Posts
The recomended the regular powergrip to me also with a projected 450rwhp-daily driver and strip terror. I called up TSP and they recomended the powergrip HD-they said they have had alot of success with them-so I got the HD. Give them a call and ask them.
09-27-2005, 04:26 PM
#3
I'm running a Ram 910 and have 440rwhp and plan to hit it with a 150NX shot. Pedal effort is a little heavier than stock. I got my parts from TSP.. talked to Jason what I was going to do... and that was his feedback.
I love it... no problems with it at all. 3 days of hard driving 80 minute road race sessions at the track and about 10 passes at the strip. Haven't smelled clutch. mid 11's@124mph n/a so far.
I would buy it again...
You could also put an LS2 flywheel on the car and run a Z07 clutch (500hp rating) for a cheaper solution. Fred Bean Chevy sells parts at near cost.
I love it... no problems with it at all. 3 days of hard driving 80 minute road race sessions at the track and about 10 passes at the strip. Haven't smelled clutch. mid 11's@124mph n/a so far.
I would buy it again...
You could also put an LS2 flywheel on the car and run a Z07 clutch (500hp rating) for a cheaper solution. Fred Bean Chevy sells parts at near cost.
09-28-2005, 12:09 AM
#4
TECH Regular
iTrader: (1)
Join Date: Dec 2004
Location: Philly
Posts: 479
Likes: 0
Received 0 Likes
on
0 Posts
i ran the powergrip for about 400 miles, and it staryed to slip. we took it out and the pressure plate had around 400-500 heat fractures in it. car makes 430rwhp and i had only dumped the clutch once. not track runs......get and HD. i have it now, and it was a pain in the *** to learn at first but now its pretty smoothe. the HD is a bad *** clutch. grabs pretty hard. its fun!
