Trev_SS

iTrader: (17)

me and my freind who has a 00 ta were trying to bleed his clutch today, but we ran into a problem, the bleeder valve is like down in the right corner, we couldn't get the 7/16 socket on it, what would you do? When i bleed mine the other day the valve was directly in the middle of the little box that its in. Need some thought on what to do with this i'm stuck.

jgarfiaz

i had the same problem i used an allen wrench and hit it with a hammer it moved a little bit and was able to slide the socket in but it took a while to get it to move

Trev_SS

iTrader: (17)

will try that thanks jgarfiaz