Manual Transmission T56 | T5 | MN12 | Clutches | Hydraulics | Shifters

Noisey Clutch....What's causing it?

Thread Tools
 
Search this Thread
 
Old 10-11-2005, 12:12 PM
  #1  
On The Tree
Thread Starter
 
97C5ENVY's Avatar
 
Join Date: Nov 2001
Location: Central, Tx
Posts: 153
Likes: 0
Received 0 Likes on 0 Posts
Default Noisey Clutch....What's causing it?

I just had a new Z06 Clutch, Flywheel, Slave, Throwout Bearing, and Pilot Bearing installed, and now i have a ton of noise that appears to be coming from the clutch area. I never had this prior to the install so I'm curious to know what might be causing it. Anyone have any ideas?

Last edited by 97C5ENVY; 10-11-2005 at 12:17 PM.
Old 10-11-2005, 01:09 PM
  #2  
TECH Regular
iTrader: (1)
 
Bugsquawsher's Avatar
 
Join Date: Dec 2002
Location: Lexington, Texas, USA
Posts: 467
Likes: 0
Received 1 Like on 1 Post
Default

Does it make the noise while the clutch is engaged or when your pedal is on the floor, (clutch disengaged)?
if its engaged , its probably the Throwout.
if its disengaged, the pilot bearing.
I know you said you had those replaced
Doesn't mean they are good.
Old 10-12-2005, 12:42 PM
  #3  
On The Tree
Thread Starter
 
97C5ENVY's Avatar
 
Join Date: Nov 2001
Location: Central, Tx
Posts: 153
Likes: 0
Received 0 Likes on 0 Posts
Default

Never mind. I tracked down the source......turns out there was some loose debris in the exhuast pipe. Don't ask because i won't tell.



Quick Reply: Noisey Clutch....What's causing it?



All times are GMT -5. The time now is 04:20 PM.