how to tell if an m6 is good
10-19-2005, 12:22 PM
#1
Launching!
Thread Starter
Join Date: Mar 2005
Location: st louis
Posts: 255
Likes: 0
Received 0 Likes
on
0 Posts
how to tell if an m6 is good ive got an m6 sitting in my garrage, when i bout it,it was out of the car, the guy told me it was good
but i would still like to know if its possible to tell if its good or not before i put it in my truck without having to trar it apart if possible
right now it has no fluid in it and shifts ok, it shifts even better with fluid in it
any other tricks to tell if its good, it is suposed to have only 45,000 on it, i swaped frnt plates adn input shafts with a local guy to make my ls1 tranny into an lt1 tranny, the gears had almost no wear on them and the 4th gear syncro that came out looked good but then again im not a tranny guy
any help appreciated
-mark
but i would still like to know if its possible to tell if its good or not before i put it in my truck without having to trar it apart if possible
right now it has no fluid in it and shifts ok, it shifts even better with fluid in it
any other tricks to tell if its good, it is suposed to have only 45,000 on it, i swaped frnt plates adn input shafts with a local guy to make my ls1 tranny into an lt1 tranny, the gears had almost no wear on them and the 4th gear syncro that came out looked good but then again im not a tranny guy
any help appreciated
-mark
