glennhl

I'm looking at going with the LS7 clutch. The stock LS1 flywheel weighs 24 pounds, what about the LS7 flywheel? Does anyone know?

glennhl

Nobody knows this? Is it the same as the stock 24 pounder?

Robinator

iTrader: (1)

I thought the stock ls1 was 34 or 37 pounds.

glennhl

No the LS1 stocker is 24. I'm just wondering what the LS2/LS7 flywheel weighs?

Robinator

iTrader: (1)

I would say a hair more considering its a 12" flywheel as opposed to the ls1 11".

bad6as

iTrader: (17)

26.4 lbs
got my l2s vette flywheel to day

glennhl

Well, it's a step in the wrong direction being 2.4 pounds heavier than the LS1 stock flywheel, but at least it weighs less than the 29 pound forged CF flywheel I'm taking out.

krexken

Unfortunately since it's a inch bigger in diameter, it's gonna act like it's even heavier. I'm still probably gonna go with one also though.

glennhl

Unfortunately, that did cross my mind, the inertia goes up by the square of the radius. However, the LS1 must be the same outside diameter, because of the ring gear must still mate with the starter. So it's not as bad as it could be.