Manual Transmission T56 | T5 | MN12 | Clutches | Hydraulics | Shifters

what's wrong with my clutch?

Old 02-28-2006, 05:49 PM
  #1  
TECH Apprentice
Thread Starter
 
rainman's Avatar
 
Join Date: Nov 2004
Location: Clear Lake, TX
Posts: 304
Likes: 0
Received 0 Likes on 0 Posts

Default what's wrong with my clutch?

so I just had my clutch replaced about 2 or 3 weeks ago as well as the slave, but not my master cylinder, which is bad. so for about a week or so, when I tried to accelerate lightly in 5th or 6th gear the RPM's jumped up a little, kind of like the tires were spinning a little, then grabbed. now it's doing it in all gears, but worse. I can't accelerate at all really in 6th, just cruise. i can accelerate lightly in other gears, but if I get on it at all the rpm's jump up to about 4000. what's going on, could it be something with my master(fingers crossed), or is something wrong with the clutch or flywheel?


Thread Tools
Search this Thread

All times are GMT -5. The time now is 09:44 PM.