OK, Narrowed The Field To 3 Clutches
#1
On The Tree
Thread Starter
Join Date: Jun 2003
Location: North Palm Beach, FL.
Posts: 154
Likes: 0
Received 0 Likes
on
0 Posts
OK, Narrowed The Field To 3 Clutches
After reading for weeks in this section, I'm down to 3 clutches.
This car is my daily driver.
I dynoed it and have 525 RWHP & 530 tq.
This is without the funny gas.
The 3 finalist are:
1. Textraila
2. Spec 4 or 5
3. Mc Cloud Twin
Any feedback would be appreciated before I make the call.
This car is my daily driver.
I dynoed it and have 525 RWHP & 530 tq.
This is without the funny gas.
The 3 finalist are:
1. Textraila
2. Spec 4 or 5
3. Mc Cloud Twin
Any feedback would be appreciated before I make the call.
#4
On The Tree
Thread Starter
Join Date: Jun 2003
Location: North Palm Beach, FL.
Posts: 154
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Ferocity02
Of those three Textralia without a doubt. Wait until their new one comes out and get that.
Is there anyone that is spraying a big stroker motor out there that can post some numbers on the Textralia?
Trending Topics
#9
On The Tree
Thread Starter
Join Date: Jun 2003
Location: North Palm Beach, FL.
Posts: 154
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by cantdrv65
If you are going to be hosing that 422 hard Id go with the Spec 5....or Mcloud twin.
One guys input shaft was chewed to ****.
I'd rather use a single if it can hold 750 - 800 rwhp.
That's why I've been watching for results on the Textralia.
But I haven't seen any big numbers yet.
#12
TECH Junkie
iTrader: (23)
Join Date: Aug 2003
Location: Tallahassee, FL
Posts: 3,467
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Ferocity02
Of those three Textralia without a doubt. Wait until their new one comes out and get that.
#13
TECH Fanatic
Join Date: Feb 2002
Location: Middleburg, FL
Posts: 1,329
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by hoserack
I'm just wondering if a single disc can and will hold up.
#14
Launching!
iTrader: (1)
Join Date: Mar 2005
Location: Rochester, NH
Posts: 297
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Turo
I wasn't aware of a new one coming out, would you happen to have any more info on it? Sorry for the hijack!
#15
TECH Senior Member
iTrader: (60)
Originally Posted by Turo
I wasn't aware of a new one coming out, would you happen to have any more info on it? Sorry for the hijack!
When dose it come out.
#17
10 Second Club
iTrader: (5)
Join Date: Nov 2001
Location: Cali/Bay Area
Posts: 3,412
Likes: 0
Received 0 Likes
on
0 Posts
Why even list the Mcleod if it wasn't an option lol! Mines holding so far, but not torture tested yet. The Mcleods are know to get destroyed if you slip the **** out of them when launching at the track though.
The Spec 5 is also in some high HP (700+) cars doing fine. On/Off type clutch though.
Cartek is also another good choice IMO (I know, it's not listed). Even comes with new pre-bled adjustable master and new slave for $860 (no flywheel). If my twin gives up, I may be trying this next.
The Spec 5 is also in some high HP (700+) cars doing fine. On/Off type clutch though.
Cartek is also another good choice IMO (I know, it's not listed). Even comes with new pre-bled adjustable master and new slave for $860 (no flywheel). If my twin gives up, I may be trying this next.