rgaynor85

ok i keep reading thread after thread about peoples clutches sticking to the floor when racing and everyone gives cheesy awnsers like it might be this or it could be that, has anyone actually had the problem and fixed it for sure. i have the problem and wanna race my car but now i cant. i wanna fix it but i dont wanna buy pointless BS and waste money on **** i didnt need. ANYONE??? plz

LS1 Sounds

iTrader: (11)

There used to be a sticky thread around here about it, written by Jaberwaki. You should be able to find it with a search.

rgaynor85

ive tried maybe u can help

Slow00ls1T/a

it can be alot of diffrent things but i replaced my slave cylinder and it fixedit

Xtnct00WS6

iTrader: (8)

I've finally fixed this and it was by doing the following:

1) 01 slave (bled clutch) - didn't fix it
2) Ram Adjustable Master Cylinder (set to stock length) and drill mod - didn't fix it
3) Bench bled - didn't fix it
4) Bled whole thing again - didn't fix it
5) Adjusted Master Cylinder to be a little less than a 1/4 inch closer than stock to the engine (shorter). - made it worse
6) Adjusted Master Cylinder to be about 1/8 inch closer than stock to the rear of the car (longer). FIXED IT FINALLY

*the key for me was the Adjustable Master Cylinder and making it a little bit longer than stock. Note I still have my stock clutch.