Manual Transmission T56 | T5 | MN12 | Clutches | Hydraulics | Shifters

Second clutch and scared it going too

Thread Tools
 
Search this Thread
 
Old 04-12-2006, 12:44 AM
  #1  
Staging Lane
Thread Starter
 
Firebirdguy00's Avatar
 
Join Date: Feb 2005
Posts: 83
Likes: 0
Received 0 Likes on 0 Posts
Default Second clutch and scared it going too

Ok I put a new clutch in the car when i got it last year (RamPowergripHD) with adj master and 02 stuff. In Feb it started to slip BAD so i bought a new Ram Powergrip non HD. It started out ok and engaged about 1/4 from the floor,but after a month it engages near the top and i have to rev it alittle. IDK y it keeps doing this! Any answers!!??

Jeremy
Old 04-12-2006, 05:21 AM
  #2  
ЯєŧąяĐ Єl¡m¡иąŧøя ™
iTrader: (18)
 
orangeapeel's Avatar
 
Join Date: Nov 2004
Location: Justin, TX
Posts: 16,083
Likes: 0
Received 4 Likes on 4 Posts

Default

Adjustable master wasnt able to compensate for this?
Old 04-12-2006, 03:15 PM
  #3  
TECH Senior Member
iTrader: (7)
 
Project GatTagO's Avatar
 
Join Date: Mar 2003
Location: The City of Fountains
Posts: 10,090
Received 1,386 Likes on 875 Posts

Default

Most clutch failures are cause by improper installation, misadjustment or excessive slipping due to the driver error.

Andrew



Quick Reply: Second clutch and scared it going too



All times are GMT -5. The time now is 01:25 PM.